DIL40/QFP144 ZIF LPC-1
Order No.: 70-0297

special adapter, assigned for NXP/Philips LPC22xx family in LQFP144 package
operation (mechanical) life of ZIF socket - 10.000 actuations

Order no.: 70-0297
Price:        € 280,00

Converter manual

• Insert converter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in device programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the device programmer.
• Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF socket. On this picture reference corner (e.g. position of pin 1) of device is indicated by dot, by number 1, by bevelled corner or by any combination of them. Then release adapter ZIF socket.
• Visual check interconnection between device and converter ZIF socket. If everything looks OK, close it and now, device is ready for programming.
• Be careful, because the incorrect insertion of converter to the device programmer ZIF socket or device to the converter ZIF socket can damage the programmed device.
• When you finish work with adapter, remove it from the device programmer ZIF socket.
• To take out the device, open converter ZIF socket and remove device from it.
• When you finish work with converter, remove it from the programmer ZIF socket.
• Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
• Operation conditions: operating temperature 5°C - 40°C (41°F - 104°F), operating humidity 20%...80%, non condensing.
• For handling with the device we recommended to use a vacuum pick up tool.

Accepted package(s)

QFP144

  Back to top

The information in this document are subject to change without notice.