Converter manual

• Insert converter to the programmer ZIF socket according to the picture placed near of it. Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts) according to the picture in control program PG4UW (Device info for selected device)
• Push the top of converter ZIF socket to open it. The top cover must be fully actuated (depressed) before inserting a package into the socket. Once fully actuated, drop the package into the socket from a height of 2 to 3mm above the seating plane. Then release converter ZIF socket. Do not push package while loading or releasing the lid! The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for the selected device.
• Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
• To take out the device push the top of converter ZIF socket and remove device from it.
• When you finish work with converter, remove it from the programmer ZIF socket.
• Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
• For handling with the device we recommended to use a vacuum pipette pick up tool.
• The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter